The Aerox Retrofit Kit consists of three parts:
- Oxysaver Cannula--this comfortable
device may be used in place of a mask at
altitudes up to 18,000 feet MSL. It has a
conserving feature that can extend your
oxygen supply up to eight times.
- Aerox Flowmeter/Indicator--this device not only
indicates oxygen flow but also reads directly in thousands of feet
MSL.
- Aerox Flowmeter/Indicator has dual scale--useable
for Oxysaver Cannulas or masks.
- Aerox Adjustable Flow Valve--an all metal, thumb
screw operated needle valve allows you to precisely control flow.
|
The adjustable needle valve is attached to the
outlet end of the connector supplied with your
system. Flow can now be controlled precisely for
altitude and type of equipment (Oxysaver
cannula, mask or regular cannula).The flowmeter and needle valve may also be
co-located. (See photo of Aerox flowmeter and
needle valve combo at right.)
NOTE: If you are using the Oxysaver cannula
and wish to exceed 18,000 feet MSL, simply
detach the cannula hose from the outlet of the
AEROX flowmeter and attach the hose from
your mask. Remember to increase flow accordingly.
|
Retrofit Connectors
If you want us to supply a connector for use
with your existing built-in or portable oxygen system, be sure to indicate the type of
connector required. See illustration at right. |
Conversion Kits for Medical Regulations
If you have an oxygen bottle with a medical regulator, you can use this conversion kit. This
results in a system with all the benefits of an Aerox factory system. Available in one- and
two-user models. (Two-user kit pictured.)
|
