Skip to content
Spares & Accessories
Oxygen Filling Adapters and Filling Systems
Masks and Cannulas
Oxygen Systems & Components
Filler Block Assemblies
Outlet Manifold Assemblies
Overboard Discharge Port
Oxygen Pressure Lines
Panel Mount Gauge
Repair Station Capabilities
Repair Station Certification
prO2-4, Personal Emergency O2 System with 4 CF Aluminum Cylinder and one Mask
Download PDF Data Sheet in the link below
prO2-4, Personal Emergency O2 System
Keep this small 4 cubic foot personal oxygen system within reach, for safety in the event of unexpected failure or depletion of your main oxygen supply, or unexpected cabin depressurization. This system is designed to give you oxygen based on a cabin pressure of 25,ooo feet and will flow at this set rate for 35 minutes, so that you can have time to get down to a safe altitude where you can breathe normally under the conditions. Simple to use, when needed pull the mask and don. The motion of pulling the mask pulls a cable that initiates the flow of oxygen. This system can be refilled after each use. This system comes standard with an aluminum DOT 3AL cylinder that has no life limits and requires a recertification each 5 years. The interface to the system is a standard economy rebreather mask, but can be upgraded to a TSO C103 mask or a TSO 64 type mask(please call for this option). The PRO2 emergency systems are availabe in 2, 4 or 6 cubic foot configurations, and the 4 or 6 cubic foot systems are available in single or dual user configurations.
4110-725-002-01-1 TSO Approved Diluter Demand High Altitude Mask with Comfort Fit Headgear
4110-476, Tubing, PFA. per foot.
4110-450-3, PB Filler w/valve, Cap & Chain. 2216 PSI
4110-725-002-03-3 TSO Approved Diluter Demand High Altitude Mask with Comfort Fit Headgear
4110-465, Indicator, Over-Board Discharge
4110-417 - Filling Adapter, hand-tite operation to service PB (MS Style) filler adapters
4110-720, Mask Storage Pouch
4110-729-2-05, Mask Assembly with Microphone, Silicone, Medium, with Fixed Flow Sky-Ox Fitting.